> I think the horn current is supposed to be about 7 amps and you
> are supposed
> to adjust the contacts with the horn blowing until you see that on an
> ammeter.
Sounds right, although ISTR there were different currents for the earlier
TR2 horns. I have done it by ear though, and the results were close enough.
> It's probably best if you are on good terms with your neighbours.
Not to mention not doing this at 10:00 at night. Probably needs an analog
ammeter too, I suspect a (cheap) digital ammeter will not like the
interrupted current draw of the horns.
Randall
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|