If you don't have any obvious leaks I would suspect the master cylinder is
bypassing at times. Probably the rubber cup inside. Problem sounds like it
is in the hydraulics not the clutch.
Pete
Hello all. Simple problem I hope !!! The pressure to the clutch
pedal comes and goes. I have to double clutch a lot to engage gears.
The pedal doesn't feel spongy. I replaced the pressure plate and clutch
plate a while back and everything seemed to be fine for a while. I have
bled the hydrolyics. If I have good pressure/stiffness on pedal no
problem shifting other than shifting into reverse which at times can be
a challenge. Any ideas?
Jerry
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|