I connected mine at the fuse block, used the fused side of the circuit that
is only on when the key is on, I also used a relay I got at Pep Boys, and
put a switch in the cockpit with an inline fuse as added protection. I'm
glad that the ammeter reflects its usage because it really draws a lot of
current and a glance at teh instruments reminds me it's on.
Just what I did, not necessarily the right thing.
Bob
----- Original Message -----
From: "Kurtis" <kurtisj@cox-internet.com>
To: "Triumph List" <triumphs@autox.team.net>; "Randall"
<tr3driver@comcast.net>
Sent: Monday, August 02, 2004 5:47 PM
Subject: Re: oil pressure
> > On a TR3, the horns are powered from the battery side of the ammeter
(and
> > besides have no convenient terminal on the side to connect things to).
If
> > you take your fan power here on a TR3, the ammeter will show the fan
> current
> > as a charge if the generator will keep up, and not show a discharge when
> it
> > doesn't keep up.
>
> Randall,
>
> As you may recall, I have an electric fan that is connected directly to
the
> battery (and thus not run through the ammeter). I'm cleaning up some of
my
> wiring, and would like to run the fan power through the ammeter. Is there
a
> connection point that you (or anyone else) would recommend to accomplish
> this?
>
> Thanks,
>
> Kurtis J.
> Russellville, Arkansas
> 1963 TR4
> CT19389L
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|