I have a newly rebuilt GT-6 motor. Upon trying to
start it I noticed that there was no oil through the
rockers. I made an oil pump priming tool, spun the
pump counter clockwise no oil yet. Tried for several
minutes zero. Removed the bolt on the back of the
head. Tried again nothing. Put an after market oil
guage in the sending unit spot and got 30 lbs of
pressure while I was spinning the pump. Machine shop
installed a new pump. Any ideas??? It does have oil in
the crankcase. This motor has been a problem for the
get go. It looks like it will continue for awhile
longer. Anything you have let me know.
Thanks.
=====
Jim Williams
__________________________________
Yahoo! Mail is new and improved - Check it out!
|