triumphs
[Top] [All Lists]

Re: TR3A wiring

To: "Richard Alexander" <RALEXANDER@smail.umaryland.edu>
Subject: Re: TR3A wiring
Date: Mon, 19 Jul 2004 06:11:24 -0400
Cc: triumphs@autox.team.net
References: <s0fafe12.060@SMAIL.UMARYLAND.EDU>
Rich,

I'm not sure but I think 14-16 volts at 800rpm is high for a 
generator.  Are you sure that's the correct reading?

Doug

At 10:47 PM 7/18/2004, you wrote:
>Greetings. As car is driven (big smile on face of driver) battery
>discharges. Generator is creating an appropriate 15-16 volts at 800 RPM
>but this voltage not reaching the regulator. I think I need  to change
>the wires running from the generator to the voltage regulator and I do
>not want to change out the whole wiring harness at this point. Wire
>looks about 16 guage--is this correct? Spade terminals are Lucar--can I
>substitute other 1/4 or 3/16 inch connectors? Soldering iron ready.
>Thanks.
>rich alexander
>58 TR3A TS26412
>On the road again...





<Prev in Thread] Current Thread [Next in Thread>