> If you have a stud broken off "flush" it may be possible to kill the rust
> and then put a hollow tube down to it and weld the tube to the
> broken stud.
> Say a 3/8's stud and a 5/16's tube. Welding rod in the center and
> you should
> have something to twist the stud out.
Nice article in the Mar/Apr issue of Home Shop Machinist on removing broken
taps and studs by welding. Even showed removal of items broken off below
the surface. Neat photos, too.
http://www.homeshopmachinist.net/
NFI, just a happy reader (and wanna-be HSM).
Randall
|