Hi Bill
I have used http://www.vehicle-wiring-products.co.uk I bought the bits to
make relay control circuits for our cars, the wire I bought was the correct
colours and capacity but was the modern thinwall insulation, I think they
could offer the original style of insulation. They are able to supply a wide
range of connectors, including the correct type for a lot of our cars.
Well worth a look even if you don't need anything now, you will have a need
for them in the future!
NFI yada yada Just another very happy customer.
Graham.
----- Original Message -----
From: "Bill Davies"
Subject: RE: Wiring source for a TR8
> > -----Original Message-----
> > From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]
> > On Behalf Of John Fleming
> >
> > I am looking for a source of an alternator wiring harness for a `80
carbed
> > TR8 with a/c. I've checked all the usual suspects (moss, rimmer,
> > victoria,
> > etc.) and nobody seems to have one around.
>
> Hi John,
> I've checked through the listings I have from my harness supplier, and all
> they have listed for the TR8 are 2 different main harnesses, which vary by
> commission number.
> Failing to find a ready made solution, you may be able to obtain the raw
> materials from these people:
> http://www.vehicle-wiring-products.co.uk
> I've not used them myself, but they have been recommended by several
> satisfied customers,
> Cheers,
> Bill.
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.709 / Virus Database: 465 - Release Date: 22/06/2004
|