RE: Starter handle for TR3A

["Randall Young" <Ryoung@navcomtech.com>]

> I had the same problem.  As it turned out the engine mounts just needed
> alignment.  I bought some big flat washers and cut slots (just so I
> wouldn't have to lift the engine so far to to fit the washers) and shimmed
> until I got alignment.

FWIW, the factory used shims for that purpose too ... P/N 109582.  They
already have slots.  $2.25/each at TRF ... flat washers are certainly
cheaper but the shims are 'correct'.

Randall