triumphs
[Top] [All Lists]

Re: Coolant Expansion bottle i38AHdwY030626

To: <spitfires@autox.team.net>, <triumphs@autox.team.net>
Subject: Re: Coolant Expansion bottle i38AHdwY030626
From: "Nolan Penney" <npenney@mde.state.md.us>
Date: Thu, 08 Apr 2004 06:16:04 -0400
Its more a matter that you don't want the expansion bottle to be empty.  Doing 
it as described by the Haynes manual will at worse result in some coolant loss 
out the vent hole of the expansion bottle initially.  After that, the bottle 
will be holding an adequate amount of coolant.

>>> Andrew Beck <abeck@ica.net> 04/07/04 09:42PM >>>
1979 Triumph Spitfire

Just finished installing a new water pump and getting everything back
together.  My Haynes manual says to full the radiator up to the top, also
fill the expansion bottle up to the top.  Then let the car run at about
1000rpm.  Then if the expansion bottle drops below half, refill....

This doesn't make sense.  Why would I want the expansion bottle to be full?


-----------------------------------------------------
The information contained in this communication may be confidential, is 
intended only for the use of the recipient named above, and may be legally 
privileged.
If the reader of this message is not the intended recipient, you are hereby 
notified that any dissemination, distribution, or copying of this 
communication, or any of its contents, is strictly prohibited.
If you have received this communication in error, please re-send this 
communication to the sender and delete the original message and any copy of it 
from your computer system. Thank you. 
-----------------------------------------------------
<<<<GWIASIG 0.07>>>>





<Prev in Thread] Current Thread [Next in Thread>
  • Re: Coolant Expansion bottle i38AHdwY030626, Nolan Penney <=