Re: TR4A single Exhaust used with a 72-74 TR6 dual exhaust header on a

triumphs

Re: TR4A single Exhaust used with a 72-74 TR6 dual exhaust header on a

To:	dmallin@attglobal.net, triumphs@autox.team.net
Subject:	Re: TR4A single Exhaust used with a 72-74 TR6 dual exhaust header on a TR25...
From:	JRossi727@aol.com
Date:	Sat, 3 Apr 2004 08:17:17 EST

Hello.  This is what exhaust I have fabricated on my 250.  Stock head, stock 
intake, with dual Webber's,  and stainless steel exhaust  header.  Two inch 
single exhaust pipe to end of tranny. Then into a dual exhaust Y-pipe of TR 4a. 
 
And dual exhaust out the back of car.    John,  Flintstone, GA

PS. All intake manifolds, Webber adapters, and stainless steel header.  Are 
HOT JET Coated.  Inside and out.  And the car has been running for about month 
now.

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: TR4A single Exhaust used with a 72-74 TR6 dual exhaust header on a TR25..., JRossi727 <=

Previous by Date:	Re: First drive..., Mitchel Seff
Next by Date:	RE: Sanity check - timing chain replacement, Randall Young
Previous by Thread:	TR3 clutch slave cylinder clevis, Mike Denman
Next by Thread:	TR3 Dash Lights, Bill Brewer
Indexes:	[Date] [Thread] [Top] [All Lists]