I checked my notes on rocker shafts. Randall spoke about this once, and I
think he said he sent his off to Rocker Arm Rebuilders where it cost about
$100 plus shipping (at the time). I believe he also mentioned that after
the cost of parts, it was easier to have them do it. But I think he also
mentioned www.shastacounty.com.
Can anybody else attest whether I could be experience estreme synapse
misfirings of the sports coil frontal lobe?
Terry Smith
TR3A (off the frame, but so am I)
------------------------
> I will be rebuilding or replacing the rocker shaft and arms soon. Noticed
it
> was worn (towards the back more than the front) when I had the head
rebuilt in
> the fall. Last I called, TRF has the shaft, but only 1/2 the arms. I
forget
> which half now. Any other recommended source, other than MOSS or VB?
Sources
> for good used assemlies? Is it better to buy (if available) a complete
rebuilt
> assemly from an independant, such as
> http://www.shastacounty.com/rockerarm/#index, or
http://www.bpnorthwest.com/tr3-4a/tr3-4.htm, or other? Any experiances?
> Any other advice?
>
> Best Regards,
> Ed (58 TR3A)
|