In a message dated 9/23/03 2:12:21 PM Eastern Daylight Time,
stilton@protoprod.com writes:
<< Is there any sort of product out there with an inductive trigger (is that
what the thing on the timing light is called that you clamp around the plug
wire) that is hooked up to a data logger? >>
You would need a digital recording ociliscope to get a true sense of why the
misfire was occuring. Just recording if a ignition pulse was present would
not be enough.
The timing light clamp is a inductive pickup.
On a related subject, there is a low buck dyno that might produce good power
results but not accomplish wat you want to do.
http://www.charm.net/~mchaney/homedyno/dynokit.htm This uses a inductive
pickup and a laptop or memory
box. This is on my list of things to try.
Harold
|