Ed ,
Can you unscrew one of the switches ?
If so , I guess you could drain the gearbox and refill with 1.8 US
pints through the switch hole . ( 1.8 pints if you're sure there's no
O/D )
> Upon further investigation the gearbox does seem to be put togther
> from inconsistant parts, no filler/dipstick on the top ...no
> filler/plug in the casing. I went a bit further and pealed back the
> rug and padding and found a molested gearbox cover (steel w/foam
> pad) and a nasty cutaway (~3" x 1.5") from the filler hole exposing
> what is apparently two switches - spade connectors, for an
> overdrive.
> Now I know I added gearbox oil in the past ... one of the two
> retaining screws/rods on the side casing ... just which one??? Did I
> just get lucky? What danger lies if I add again in one of these
> locations?
Personally I would leave those screws where they are .
You might have been just lucky .
Cheers ,
Mike .
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|