Are you sure Jim? I have a factory hardtop. Putting a straight edge against
the glass. L to R, there is a distinct convex curvature to it. Over an inch
at centre when flush on the left.
> From: owner-triumphs@autox.team.net (Triumphs@Autox.team.net daily digest)
> Reply-To: owner-triumphs-digest@autox.team.net
> Date: Thu, 27 Feb 2003 06:28:27 -0700
> To: triumphs-digest@autox.team.net
> Subject: Triumphs@Autox.team.net daily digest V1 #1477
>
> Date: Tue, 25 Feb 2003 19:40:18 -0500
> From: "Jim Davis" <jdavis344@bellsouth.net>
> Subject: RE: Is TR6 Hardtop Rear Glass Flat?
>
> Mine is flat.
>
> Jim Davis
> Fortson, GA
> CF38690UO
> CF37325U
>
> List'rs,
>
> Can anyone with a TR6 hardtop tell me if the rear glass is perfectly
> flat. I
> know it has curves to fit the notched bottom corners but is the glass
> itself
> perfectly flat (without any curvature)?
>
> I'm guessing that the glass can be replaced by a competent glass shop
> using
> standard variety, flat safety glass.....but I'm not 100% certain.
>
> TIA
>
> Chip Krout
> Skippack, PA USA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|