Message text written by Michael Graham
>The fuzzy material on the glass channel assembly on the driver's door of
my
73 TR6 has disintegrated and the window glass rattles every time the door
is closed. I have taken the channels out and they are still very solid and
rust free, but the fuzzy material is shot. The TRF catalogue only shows a
complete replacement part. Has anyone found a source (ideally in Canada)
for the fuzzy material itself? Seems like it should be easy enough to clean
up the old channels and glue on some new material. Any assistance much
appreciated.
<
If you consider Chicago almost Canada, I suggest you check the J. C.
Whitney catalog and you will find a resonable duplicate of the channel and
you can do as I did and drill out the rivets and transfer the mounting
brackets to the new channel and you'll be good to go for a lot less money
than buying ready-to-use guides.
Cheers and good luck
Dave
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|