Michael,
Moss sells a replacement for just the lining. You have to rivit it in place.
I did this last summer on mine. Here is a link describing the job:
http://home.earthlink.net/~bk13/sctoa/win-chan.htm
Hugh Fader
> -----Original Message-----
> From: owner-triumphs@autox.team.net
> [mailto:owner-triumphs@autox.team.net]On Behalf Of Michael Graham
> Sent: Saturday, February 22, 2003 9:26 AM
> To: triumphs@autox.team.net
> Subject: Glass Channel Assembly (TR6)
>
>
> The fuzzy material on the glass channel assembly on the
> driver's door of my
> 73 TR6 has disintegrated and the window glass rattles every
> time the door
> is closed. I have taken the channels out and they are still
> very solid and
> rust free, but the fuzzy material is shot. The TRF catalogue
> only shows a
> complete replacement part. Has anyone found a source (ideally
> in Canada)
> for the fuzzy material itself? Seems like it should be easy
> enough to clean
> up the old channels and glue on some new material. Any
> assistance much
> appreciated.
>
> Cheers, Mike
> CF727U
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|