Re: Wheel stud size

["Steve W. Reilly" <luckyone@sympatico.ca>]

Andre,

Stock stud size for GT6/spitfire is 3/8" NF.  Some owners upgrade them to 
7/16NF.  The smaller size (although unusually small) is "factory correct" 
for GT6/spitfire.  Always torque the stock spitfire/gt6 studs by hand; 
NEVER use an impact wrench.  I think the 3/8" studs are to be torqued to 
about 40 LB/FT.

'70 gt6's

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive