Scott Suhring wrote :
> Put on the standard cork gasket,
> which gave a better seal, but still could slightly move the gasket on
> the back end with the cover in place and tightened down. To get a good
> seal that seemed to firmly hold the gasket in the back end, I really
> had to tighten down the lock nut, the rear one.
Scott ,
Are the studs the correct length ? I just measured 3 1/8" sticking out of the
head for a stock cover .
Good luck ,
Mike .
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|