> > ...Now you've got me really confused! ;-)
> >
> > BTW, I have the oil to the top of the inner tube, which is more
> than a 1/2" from
> > the top, but certainly more than the old 1/4" trick.
>
> You're confused -- I didn't even know I needed to oil my
> innertubes! That might
> explain that flat tire I got just a couple days after getting the
> new tires and
> tubes. I'm going to have to search the archives for tips on how
> to get oil into the
> inner tubes through that little valve. Do I need a special tool?
Yes, it's absolutely essential that you use Churchill tool number
ZX4-92017/A. Otherwise the oil will run into the framistat housing and
cause the QEXB to quit working. However, you can't buy the tool, you'll
have to make one from old popsicle sticks and unobtanium.
Randall
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|