>And finally . . . I don't particularly like the looks of the hardware holding
>the clutch on. I don't trust PO's too much, so I'm going to replace the
>bolts.
>Does anyone happen to know the size / length / grade of hardware I should use
>off hand?
>
>There should be 6 bolts with lockwashers holding the pressure plate to the
>flywheel. They are 5/16" x 3/4" UNC which should be threaded full
>length. Not sure what "grade" bolts are equivelent, but I'm sure you
>can't go wrong with grade 8 fasteners.
Steve
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|