Phil Evans wrote:
>
> I have research material from Piggott's to the Bentley manual plus the
> three major parts catalogs, but cannot find the the answer to two
> unrelated questions.
> 1) where do the ends of the accelerator return spring anchor? A picture
> would help, I realize it is a very tight area.
In the engine compartment, where the lever sticks up from the rod that
crosses the engine from the pedal (on LHD cars), there is a hole in the
front edge of the lever, about 1/2 way up. There is also a small tab of
metal on the bulkhead, right where it changes from sloping towards the
front to slopin towards the back, but on the flat side that faces the
engine. The return spring runs between these two points. All of my 3As
have been that way, but the 56 TR3 I had for awhile was missing the
tab. I always assumed it was just broken off, but perhaps earlier cars
were different.
> 2) where can I find a listing for the bracket on which the wiper motor
> sets - i.e. between the car body and the wiper motor's cylindrical legs
> with rubber cushions? The bracket can clearly be seen in the TR2/3/3A
> Piggott book pg 65, yet no parts catalog seems to list it.
Page 81 of the factory SPC (reprints available from TRF), illustration
AG11, P/N 602130 up to TS12569, 702377 afterwards.
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|