The regulator uses funky sheet metal screws, with a spring steel 'nut'
that clips into a square hole in the firewall. If memory serves, the
fuse block is the same thing, with shorter screws. On my car, the
flasher clip is a sheet metal screw threaded directly into the firewall,
but it's most likely not original.
Randall
David Templeton wrote:
>
> Hi all,
>
> Just quickly, what screw/bolts are used to hold down the regulator/fuse
> block/flasher canaster?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|