Mitchel,
The dwell is pre-set in the electronics of the MSD.
The points are just used as a trigger. All you do is set the timing with a
timing light and the rest is
automatic. (set the points a little to the wide side to allow for wear).
-Tony
Message text written by INTERNET:owner-triumphs-digest@autox.team.net
>From: Mitchel Seff <ms6453@optonline.net>
>Subject: Setting dwell
>
>Hi all-I'm having a problem setting the dwell. No matter what I set the
>point gap to the dwell angle reads 55 deg. I have set the points from
>.014 to .016 with no change. I am using an MSD. The meter hook up is
>ground & + side of the coil. I have verified that the meter works on
>another car. What's up?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|