>===== Original Message From Randall <randallyoung@earthlink.net> =====
>Mitch :
>
>I believe, when setting the dwell on a MSD system, you need to connect
>the meter directly to the points. There's actually no need to check the
>dwell, the MSD doesn't pay any attention to it. It only looks at the
>transition when the points open, eveything else is determined by the
Randall,
I have an old Heathkit tune-up meter I built back in the 70s and use the
electric tach all the time. I would love to check the point gap more
precisely if I knew the dwell spec for the TR 4-banger and how the dwell is
calculated and behaves as you change the pont gap.
TIA
Brian Sanborn
62 TR4 CT16260L-O - Groton, MA
My TR4 Restoration Web Site
http://www.net1plus.com/users/sanborn
E-Mail: sanborn@net1plus.com
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|