List,
Body mount help on TR4A
I need some help on the fastner sequence at the two points along side the
motor. I have a big bolt, large, thicker flat washer, a large spacer/washer
that has a slotted hole. I also have two rubber washers of unequal
thicknesses, then a smaller flat washer, a lock washer and a nut.
I am thinking I put the larger flat washer on the bolt first. Then build a
sandwitch of the two rubber washers with the large slotted spacer in the
middle. That set goes between the body and frame. I pass the bolt/flatwasher
thru the hole, place the smaller flatwasher, lockwasher, and nut on the
bolt.
What about it??
It would really be nice to talk to someone who has done this. If you send me
your phone number off list I will call.
Thanks,
Dave Connitt
Cincinnati, OH
'66 TR4A CTC71048L
http://home.fuse.net/davestr4a/
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|