High idle (1970 TR6)

[CC50506@aol.com]

I just rebuilt the carbs on my 1970 TR6 (stock strombergs with "fixed" 
needles).  They were really crudded up  - most of the internal passages 
completely blocked with grunge.  

It started fine when the carbs were refited BUT (there's always a but!) I 
can't get the idle below 2700 rpm, even with the linkage disconnected and the 
idle screws backed all the way out.  

What could I have done wrong here?

Thanks,
Steve

///
///  triumphs@autox.team.net mailing list
///