Hi Cathy
I have the Standard Triumph Workshop Manual for the Herald Vittesse and
Spitfire 4 and this gives the backlash as 0.004 to 0.006 inch I take it this
is what you want, please bear in mind setting up the diff is more complex
than just getting the backlash correct, you have to adjust in and out of
mesh and the pinion height to achieve the correct contact footprint between
the gears. If you would like further information I will scan the manual
pages for you.
Graham,
1967 1300 FWD
1968 2000 Saloon
1972 2.5PI Saloon
1974 Sprinted Dolomite 1850
1975 Toledo in restoration!
http://www.triumph-iw.co.uk
http://www.mickdolphin.co.uk Spares Supplier.
Subject: ring and pinion clearance on differential
|
| Tried looking this up in haynes, and autobook, but cant find the specs.
| how much play should you leave between the ring and pinion gears when
| rebuilding the differential?
|
| This is on a 63 spitfire
///
/// triumphs@autox.team.net mailing list
///
|