Message text written by "Boothroyd, Frank"
>So any advice? Any TOTT? (as you can tell, I'm rather proud of the
acronym!) Do the clips go on the door first then slide the seals in? Or
are the clips put on the seals first? Does one lubricate and/or use a
special BL Door Seal Installation Tool ($95.00 NOS)?
<
Make your own tool. Buy some 1x1/8 steel flat stock at the hardware store,
clamp the last 1/4 inch in the vise and bend over 90 deg. Then you can use
it to pull up on the clips. You still have to hold them by hand to get
them started but once started they will push home with ease.
Dave
|