Hi Lee
I bought some straight brake line clips a few years back at a show in the UK
(NEC Birmingham) the vendor also had the clips to which you refer
Unfortunately I don't remember their name but the clips should be readily
available as they were new repro injection mouldings, so you might try some
of the brake line vendors! Just a thought, I will try to locate a name but
don't hold your breath as they say!
Graham.
2500PI MKII
Sprinted Dolomite
2000 MKI
Toledo
1300 Front Wheel Drive
http://members.tripod.co.uk/TriumphIW/index.html
----- Original Message -----
From: <lee.k.janssen@lmco.com>
To: <triumphs@autox.team.net>
Sent: Monday, June 12, 2000 1:28 PM
Subject: 2500 (and others?) plastic (nylon) fuel line clips
>
> Truely a shot in the dark but I've checked Rimmer and Revington TRs
catalog
> with no success. Does anyone know where to obtain the plastic (nylon?)
fuel
> line clips that hold both the 5/16 inch fuel line and the 1/4 inch fuel
> return lines on the 2500 PI. Some plastic clips are currently supplied by
> TRF and Moss however, they are either out of stock or are confirmed to be
> the wrong size.
> Thanks much for the help, and I won't get too upset if I don't get a
> response....
> Later
> Lee Janssen
> Sunny Denver CO.
>
>
>
|