To: | triumphs@autox.team.net |
---|---|
Subject: | Help in removing rear bump stop |
From: | Edward Lancaster <elancast@bellsouth.net> |
Date: | Tue, 08 Feb 2000 18:32:18 -0500 |
I am in the process of rebushing the trailing arms in the TR6. Since I have the trailing arm off the car, I decided to replace the bump stop which was cracked. After removing the rubber part of the bump stop, I am left with a flat washer sitting atop the pedestal on the trailing arm. I tried turning the washer with pliers, but it won't move. Heating with a propane torch has not helped. I would appreciate suggestions from anyone who " has been there". Ed Lancaster '74 TR6 |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Valve guide seals for TR6, Martin A. Secrest |
---|---|
Next by Date: | Re: Vic Brit Wheels, Beth & Ken |
Previous by Thread: | Time to move on..., Musson, Carl |
Next by Thread: | Re: Help in removing rear bump stop, Chip19474 |
Indexes: | [Date] [Thread] [Top] [All Lists] |