Hi Rob
Whatever you use, use it sparingly or it could clog up the O/D like happened
to mine, built by an "exspert" (ex as in has been +spert is a drip under
pressure) no offence intended to the real people who know, we need you! My
choice of sealant is Blue Hylomar it is a non setting type and used to be
used and still may be by R.R. I believe, and if it's good enough for them
it's good enough for me.
Graham.
----- Original Message -----
From: Rob Christopher <robc@cisco.com>
To: <triumphs@autox.team.net>
Sent: Friday, February 04, 2000 7:10 PM
Subject: Tranny gasket sealant and synchro cups
>
> OK folks,
>
> I've got all the gaskets now that I need to start reassembling my tranny
and
> OD. So what are you recommendations to use as a gasket sealant so the
> re-assembly?
>
> Thanks to all who responded to my question on synchro cup wear
indications. For
> those who keep score, there are apparently three places to check:
> 1) The rings on the inner surface that rides on the main/input shaft
should not
> be worn.
> 2) The dog teeth should be "house shaped", not worn
> 3) The clearance between the synhro and gear should be checked
>
> Rob
> Ottawa, ON
> 74.5 TR6 CF27218UO
>
>
>
>
|