Hi Bill,
It is possible. I had a TR3 that was deseamed and welded together so there
was no other way. But you have to take the fan off (pain in the rear
job)then I think I usually took the crank bolt and extension off the front.
And when you leave the crank hole out, that is not possible. Then you have
to take the head and maybe the water pump off. To sum it up, it is possible
but much more trouble I think.
Cheers,
Mike
> From: "Bill Brewer" <bbrewer@lightspeed.net>
> Reply-To: "Bill Brewer" <bbrewer@lightspeed.net>
> Date: Tue, 1 Feb 2000 20:43:03 -0800
> To: <triumphs@autox.team.net>
> Subject: TR-3 Radiator Removal
>
>
> Is it possible to get the radiator out of a TR-3A without removing the
> front cowl? Anyone done this job recently?
> I am going to recore the radiator without a crank hole and install an
> oil cooler.
>
> Bill Brewer
> Tehachapi, CA
> 1960 TR-3A TS 72747 LO - Driver, getting floors & interior
> 1961 TR-3A TS 75407 L - Lots of pieces.
>
>
>
|