Hi David,
I haven't seen this particular piece but several Triumph engines do the same
sort of thing, and if it is similar to say, a 2000 sedan set-up, then you
should be able to get this done at virtually any machine shop: price
dependant on whether they want the job or not!!
Graham, (toolmaker).
----- Original Message -----
From: David Lee <davelee1@home.com>
To: triumph <triumphs@autox.team.net>
Sent: Monday, January 17, 2000 3:43 AM
Subject: electric fan conversion TR4
>
> Hello
> I removed my radiator and mechanical fan today. I never realized the fan
> hub and bolt held everything on to the crankshaft. I am interested in
> getting a replacmenent piece fabricated that doesnt extend outwards that
can
> accept a much shorter bolt to crankshaft so I can make my fan a puller.
> This seems like a real simple fab but I have no machinery. Would I be
able
> to go to any machine shop and ask them to do this or are there specialty
> shops that I should go to?
>
> David
>
>
>
|