Rick, there is a large nut that screws into the tank, and then the gas feed
line, if you use 2 wrenches on these connections, it almost has to come out,
I would be of special concern on the captive nut in the tank it's self, the
line can be replaced if you have to end up cutting it. Brad usually makes
house calls on his used cars. "FT"
----- Original Message -----
From: Rick Taylor <rgt3000@fuse.net>
To: <triumphs@autox.team.net>
Sent: Tuesday, January 11, 2000 7:27 AM
Subject: TR3A Help
>
> Listers
>
> I need help with my latest project (a TR3A bought from Brad).
>
> How do you get the rear portion of the fuel line off of the car? I want
to
> remove it and then repair the sheet metal, then remove the body for the
> frame restoration. I cannot get the line out without destroying the line.
> Any suggestions?
>
> Thanks for the help. This is the last removable item from the car.
>
> Rick
> TR4A CT57505L
> TR3A TS41311L
>
>
|