Whoa there boy's!
I used the poly bushings from NPNW and after 6 months they "ovaled out"
on me! I used grease on'em so that may have affected them. I have
installed new ones w/o grease from the same supplier and haven't checked
them yet to see if they have "ovaled out" or not.
My advise is to use the "updated rubber" ones from TRF.
-jimb
>
>
> It has been suggested to "grease" the trailing arm bushings. I caution you
> about the use of grease with the rubber bushings. It will soften the rubber.
>
> My opinion, after putting in brand new rubber bushings then replacing them
> with poly ones from BPNW, FORGET the rubber! Use only the poly. I noticed a
> tremendous reduction in the "Triumph Twitch." When installing use plenty of
> anti-seize compound (or grease) to eliminate the possibility of squeaking,
> it should not affect the poly.
>
> Mike Cline
>
>
## Jim Barbuscia SE Sun Microsystems Kirkland, WA. ##
## http://sunup.West.Sun.COM:80/~jb ##
## Standard Disclaimers apply (Jim.Barbuscia@Sun.COM) ##
|