To: | "Triumph list" <triumphs@autox.team.net> |
---|---|
Subject: | Trailing arm bushings |
From: | "Michael Cline" <mcline@substrates.com> |
Date: | Wed, 17 Nov 1999 10:26:11 -0700charset="iso-8859-1" |
Cc: | <dms@snip.net> |
It has been suggested to "grease" the trailing arm bushings. I caution you about the use of grease with the rubber bushings. It will soften the rubber. My opinion, after putting in brand new rubber bushings then replacing them with poly ones from BPNW, FORGET the rubber! Use only the poly. I noticed a tremendous reduction in the "Triumph Twitch." When installing use plenty of anti-seize compound (or grease) to eliminate the possibility of squeaking, it should not affect the poly. Mike Cline |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Blue Magic, Thomas Fansher |
---|---|
Next by Date: | Website update and a question ..., iron_horse819 |
Previous by Thread: | Re: New TR6 Owner (Nearly), Don Kerr |
Next by Thread: | Re: Trailing arm bushings, Jim Barbuscia |
Indexes: | [Date] [Thread] [Top] [All Lists] |