Depends on your point of view <g>
If you are looking down 'through' the carb at the nuts, then it is CCW
to lean them.
Looking up at the nut from underneath, it's CW to lean them.
The nut (and the housing it threads onto) are normal right-hand threads,
the further you screw the nut onto the housing, the leaner the setting.
Or another way to look at it is, if you had a wrench on the nut, with
the other end pointing towards you, you'd move it right to lean, left to
rich.
Randall
greg cook wrote:
>
> Which way to turn the mixture adjusting nuts on su carbs on a 59 tr3a cw or
>ccw to lean them out.I was under the impression it was cw to lean them but it
>seems to have the opposite effect on mine
> Greg Cook
> Jacksonville FL
> 9047987610
> gcook@webmail.bellsouth.net
|