triumphs
[Top] [All Lists]

TR2 windscreen frame Q 2

To: triumphs@autox.team.net
Subject: TR2 windscreen frame Q 2
From: John Gillis <jgillis@tcd.ie>
Date: Tue, 13 Apr 1999 14:55:08 +0000
Thanks for the very sound advice on removing the blocks from the inside of
the frame. It seems I will have to make new ones of the straight type and
buy the angled ones from Moss. I wonder could I make the new ones from
brass or alluminium, as this would be easier to cut to size and tap for the
screws ??, any thoughts. I have chosen one of the two frames I had in
stock, based mostly on the fact that one frame seems to have had all the
Tenex holes drilled out to a larger size and also right through and out the
other side of the frame !!!!. I am guessing that the Tenex fastners do
screw directly into the frame, as I can see thread on the better frame, any
advice here?? There must be a danger of the thread hitting the glass???,
thanks in advance

John Gillis
1954 TR2 TS3618. October 1954 (ground up)
1964 Triumph 3TA 350cc (a little gem)
Trinity College
Dublin,
IRELAND.



<Prev in Thread] Current Thread [Next in Thread>