Message text written by "ryoung@navcomtech.com"
>If it were me, I'd go ahead and drop the diff cover before doing anything
else. If it was locked that solid, and came loose with a bit of jiggling
on the flat bed, something is VERY wrong.<
Randall,
You are right. I should pull off the cover and take a look. What's
putting me off is the 1/4" layer of greasy road grime that needs to come
off first!
I have to wait for the new seal to get mail ordered so I will go ahead and
take a look see inside.
BTW, I can grab hold of the threaded end of the pinion and move it sideways
about 1/16". Is this bad?
Regards, Adrian
|