triumphs
[Top] [All Lists]

Re: New Brake fluid

To: Alan Myers <reagntsj@ricochet.net>
Subject: Re: New Brake fluid
From: Joe Curry <spitlist@gte.net>
Date: Wed, 24 Mar 1999 22:46:32 -0800
Cc: Brian Borgstede <borgstede@umsl.edu>, triumphs@autox.team.net
References: <v03007803b31f18db0c6c@[134.124.176.30]> <36F97068.FF5F6016@gte.net> <36F9D755.D11EEBA0@ricochet.net>
Alan,
Oh, you want to talk seriously!!!  I think I might be able to muster a
few seconds of serious consideration. (maybe)

The Modern sealed reservoirs typically have a diaphragm under the cover
that either expands or collapses to the conditions of pressure and
vacuum that is experienced with temperature changes.

I have found that if the reservoir becomes low the diaphragm will even
collapse into the tank.  It must therefore be returned to its normal
shape when the tank is refilled.

I also noticed that the fluid (or fluif if you prefer) in my Blazer
turned a nice shade of rusty brown after about 100,000 miles and I
flushed the system and put in fresh fluid.  After almost 200,000 miles
it still has had no brake hydraulic trouble.  Just gotta love those
"Chebbies"

Joe

Alan Myers wrote:
> 
> All foolin' aside, I think you'll find all brake fluid reservoirs have
> some form of venting. If they didn't, the rising and dropping levels of
> fluid (or fluif, as it is better known on the list) would form either
> mild compression or vacuum inside the reservoir, one of which could
> possibly cause a shoe or pad to drag, the other could draw air into the
> system through any "weak point". The levels have to rise and drop as you
> apply the brakes, as the shoes and pads wear, and as temperatures vary.
> But, hey, I ain't no engineer!
> 
> Alan Myers
> San Jose, Calif.
> '62 TR4 CT17602L
> 
> Joe Curry wrote:
> >
> > Brian Borgstede wrote:
> > >
> > > Since the topic has been drug up to the surface again,
> > > from the pit of threads that never die...
> > >
> > > If DOT 3&4 brake fluids take on water as they do,
> > > Why are the master cylanders on our LBCs vented to the outside air?
> >
> > Oh, That one's easy!  The vent is so that when the fluid gets hot it
> > will expand and leak out the hole and onto your freshly painted engine
> > compartment.  This of course will cause the paint to bubble up and come
> > off in sheets!
> >
> > Perhaps there was an agreement between the Auto paint manufacturers and
> > Girling like the one that apparently exists between the windscreen
> > suppliers and the people who deliver crushed rock in the State of
> > Washington (and perhaps elsewhere).  8^)
> >
> > Joe
> >
> > --
> > "If you can't excel with talent, triumph with effort."
> >  -- Dave Weinbaum in National Enquirer
> 
> --
> MZ

-- 
"If you can't excel with talent, triumph with effort."
 -- Dave Weinbaum in National Enquirer

<Prev in Thread] Current Thread [Next in Thread>