Fred , Here's a couple of blurbs from some past messages that I saved.
The gun is sold as Quicksilver Grease Gun, part number C-91-37299 and cost
is approxiamtely $20.00 Canadian. The oil I used is Quicksilver Gear Lube Super
Duty in a 250 ml tube, partnumber 92-98780 and cost was $4.00 Canadian.
There is an article on the Mercurygrease gun on WWW.VTR.ORG in the
maintenance section. The correct art. no should be: C-91-37299.
A short time ago someone on the list recommended going to a boat dealerand
buying OMC Ultra-HPF gearcase lube. I bought a 250 ml tube for $4.40and a
Jiffy Luber Handi Gun made by Lubrimatic for $11.99. Had to adapt the gun to
use a grease gun fitting. Works great.
By the way, Brad Kahler's in town and he showed me pictures of the 3 your
restored. Nice job! It's awesome.
Bud 71TR6 CC57365
____________________Reply Separator____________________
Subject: trunnions
Author: fred thomas <vafred@erols.com>
Date: 11/4/98 7:42 PM
Listers, does anyone have the "Mercury Outboard" motor oil kit # for
oiling the trunnions instead of greasing them, I have filed it in a safe
place so as not to lose it, and now I can't find it. Thanks. "FT"
|