Tom,
I bought this equipment last spring at a local Mercury dealer. You'll
have to find a Mercury dealer to buy the stuff, they don't distribute
except through dealers.
>From the VTR web page posted by our own Peter Zaborski:
http://www.vtr.org/maintain/trunnion-oil.html
The gun is sold as Quicksilver Grease Gun, part number C-91-37299 and cost
is approxiamtely
$20.00 Canadian. The oil I used is Quicksilver Gear Lube Super Duty in a
250 ml tube, part
number 92-98780 and cost was $4.00 Canadian. Mercury Marine is a world wide
brand of power
boating eqiupment and should be available just about anywhere.
At 03:44 PM 7/23/98 -0400, Tomislav Marincic wrote:
>
> Triumphisti,
>
> About a year ago, we were talking about the difficulty and mess
>involved with oiling the front trunnions using an ordinary grease gun when
>someone mentioned that Mercury Marine made a "grease gun" specifically for
>oiling stern drives. I copied the part number as Mercury/Quicksilver 91-372
>99A 1 and the gear lube cartridges as 92-19007A24. When I recently tried to
>purchase these, the Mercury Marine dealer told me those were invalid part
>numbers and that he had no idea what product I was describing. The Mercury
>Marine web site was no help either, except for locating dealers.
>
> Does anyone have this thing? Where did you get it? Does anyone know
>the correct part number and where I might mail order one?
>
> Best Regards,
>
> Tom Marincic
> CD3574L
>
> P.S. I know many listers use grease in the trunnions with
>satisfactory results.
>
>
>
>
|