>3. The real blessing out of this project concerns the other problem
>solved as a result of dropping the pan. Found no thrust washers in
>there, but did find a small phillips "set screw" that was about 3/8"
>long. After much research in the parts manuals/diagrams, I determined
>it was the locating screw for the rocker shaft assembly. And sure
>enough, pulled the valve cover and no screw in the shaft.
Martin,
Glad to hear that all went well.
I found that same screw in the pan of one of my TR-6 engines. I wonder if
the cause lies with a DPO or whether this is a problem common to the 6?
Richard Leopold
75 TR-6 Done and drivin'
73 TR-6 In boxes
71 TR-6 In the backyard
|