To: | Brian Kemp <bk13@earthlink.net>, triumphs <triumphs@Autox.Team.Net> |
---|---|
Subject: | Re: "clunk on fast acceleration" |
From: | oconnor@fuse.net |
Date: | Fri, 22 May 1998 09:11:35 +0100 |
References: | <H00000a10278b23f@MHS> <3561037A.2F059E5A@earthlink.net> |
Brian Kemp wrote: > > > A torque wrench is a very valuable tool for applications like those six studs > holding the rear hubs/backing plates. 26-28 lb-ft isn't very much. > > Brian > Correct me if I'm wrong, but the torque on these stud is 15 lbs.-ft. 26-28 is a lot of torque. These studs are going into a soft aluminum casting. I've used some locktite, new nuts and careful torquing on these studs. Kevin O'Connor |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: TR4 vs TR4A seat adjusters, ArthurK101 |
---|---|
Next by Date: | Re: TR6 Front Suspension, oconnor |
Previous by Thread: | Re: "clunk on fast acceleration", Brian Kemp |
Next by Thread: | Re: "clunk on fast acceleration", Brian Kemp |
Indexes: | [Date] [Thread] [Top] [All Lists] |