To: | <triumphs@Autox.Team.Net> |
---|---|
Subject: | Tyres for TR6 |
From: | john_worthy_at_wca-0606@mail.workcover.nsw.gov.au |
Date: | Wed, 13 May 98 10:02:19 +1000 |
Previously I asked the lkist for assistance in calculating the overall gearing of a TR6. The question stemmed from the fact that the TR6 I recently purchased had 185/65 tyres on it. Got a number of responses to my question and all agreed that 185/65s were totally inappropriate. I now want to replace these and was set on getting a set of 205/70s until I read on the VTR maintenance page an article on TR6 tyres which says: "I would stay away from the 205/70-15 or shorter profiles (like 60 series) unless you don't care about how accurate your speedometer is. If you're into autox you might want the 205/70 because they are roughly 2% smaller diameter." This person promoted the 215/70. Now I'm totally confused. If the original tyres were 185/80 then the tyre width was 148mm. 205/70s are 143.5 while 215/70s are 150.5. It would seem 215s are closer to original. However. they border on overtyring the rim and look big. What advice can listers give me? John 72 TR6 |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: How long will an engine last?, msecres |
---|---|
Next by Date: | Re: Off Subject: past humor all the way to nonsense!, Ralph Jannelli |
Previous by Thread: | [no subject], Sumner Weisman |
Next by Thread: | Re: Tyres for TR6, Darrell Leach |
Indexes: | [Date] [Thread] [Top] [All Lists] |