The car is a '73 TR6.
I will remove the lock tonite to look for a number and get back to ?
tomorrow.
The locks appear original but who knows? I believe on the TR's there
was a door/ignition lock, glovebox lock, AND a trunk lock. 3 different
locks.
Jeff
Subject: Re: boot lock barrel removal
Author: ArthurK101 <ArthurK101@aol.com> at SMTP
Date: 3/26/98 4:10 PM
In a message dated 98-03-26 15:00:03 EST, ArthurK101 writes:
> Jeff, - keep it simple - keys are available. Take a look at the lock and
see
> if there is a number stamped on it.
Jeff, what I said and what Andy Mace said are the same AND you won't need a
locksmith to do it. The keys are available from several guys whom we know
from the list.
Again - which kind of car? [I ask this because, for example, the TR4 came
with a set of two keys. One key for the ignition/doors and the other key for
the glove box/trunk. This configuration is very handy because you only need
to carry around two keys]. One of the TR6 folks should know what the set
configuration was.
Are your locks the original ones? Is the trunk lock only "frozen" - rather
than you not having the correct key? Don't go rushing off here. :-). Cheers.
Art Kelly
|