Hey All,
I just got the body on the frame last week and I noticed something that
concerns me. When I didn't have the body on the frame I had a positive
chamber on the rear tires. But the lack of weight on the frame was
preventing the springs from compressing, so I figured once the body was
on things would be normal.
Now that the body is on the springs have compressed just slightly, and
I
still have a slight positive camber. I am wondering if I have tightened
the four bolts for the trailing arms to much, and it is prevents the
trailing arms from moving up and down freely. Once I tightened them I
couldn't move the trailing arm freely by hand (before the rear link was
attached). How tight should these bolts be.?
Thanks,
JHD IV
|