Isaac,
If you haven't already, make sure that the piston in the carb is moving up
as far as it should. It should move fairly easily. I am not sure what
would make it suddenly stop moving, but it could be binding someplace.
Roger Elliott
80 Spit
70 GT6
----------
> From: Isaac Crow <Isaac@Avana.Net>
> To: triumphs@autox.team.net
> Subject: Spit Question
> Date: Friday, October 03, 1997 11:36 AM
>
> List,
>
> time, the engine does not want to rev above 3000 rpm. When the
> accelerator is floored, it stays at this RPM, with a little bit of
> skipping. I checked the throttle linkage and it is ok, and tried reving
> the engine from the linkage itself, but there was no difference.
>
> --
> Isaac Crow
>
|