Hello TR gurus,
While replacing the U Joints on my rear axel I notice that one of the bearing
caps had an extremely large amount of play in it, so much that I could push the
old bearing cap out with my hands and slide the new one in without any effort.
To top it off there is a significant gouge taken out of the inner yoke and file
marks galore. Obviously the part is not worth a #@% and needs to be replaced.
Anyone on the list have a spare female end to the drive shaft (the sliding
member closest to the diff, TRF part # 140749, plate BK3) that they might want
to let go of. My hubs have had the bearings replaced recently so I only need
the yoke and inner shaft . I assume that if I do find the part I will need to
balance the shaft. Any insights?
Thanks in advance, this list has been a saving grace, thanks to all that have
helped in the past!
New motto: expect the worst, hope for the best
Ken
TR 250
Nor Calif.
|