I just purchased a TR 4 A parts car that appears that had several performance
mods (roll bar) additional bolts in front control as per Kas Kastners
instructions in the competition preparation manual
But it also had a set of Koni's (front) these are red, with some warnings about
procedures for adjustment.
Are these reasonable shocks for street use. One of the suppliers of TR parts
suggested that Koni's were really too hard for street use
I have understood that Koni's don't generally wear out because they can be re
adjusted.
If so how does one adjust them these compress with moderate difficulty and
expand with a great deal of effort.
Thanks
Tom Leake
CTC50609L
CTC50250L
one of these is a donor, not sure which one yet
|